Colors COB LED Strip Light

Choose RGB if your main goal is decorative colors and you rarely need white light.

Choose RGBW if you also need a dedicated white channel with one selected white color temperature.

Choose RGB+CCT if you need both RGB colors and white light that can change from warm to cool.

Tell us how you plan to use the white light; that is usually the quickest way to narrow down the choice.

Colors COB LED strips are controlled using compatible controllers, which may offer remote or app-based control. These controllers allow you to adjust the brightness, color, effects, and in the case of RGB CCT strips, the color temperature. Some systems are also compatible with smart home setups like Alexa, Google Home, or smart lighting systems.

Yes, Colors COB LED strips are designed to be cut at specific intervals, typically marked on the strip. After cutting, you will need to reconnect the strip using appropriate connectors or soldering to ensure it remains functional.

Tell us whether you need RGB, RGBW or RGB+CCT, the required white color temperature or adjustment range, installation length, number of control zones and preferred control method. Include your available power-feed locations, installation environment and any cut-length requirements. With a drawing or length list, we can help match the strip, controller and power supply.

These strips typically require a low-voltage DC power supply, usually 12V or 24V, depending on the specific model. It’s important to ensure that the power supply matches the voltage and wattage requirements of the strip to avoid any damage.

Some models come with waterproof ratings, such as IP65 or IP67, making them suitable for outdoor use or in areas exposed to moisture. Always check the IP rating to ensure the strip is designed for outdoor installations.

High-quality COB LED strips typically provide flicker-free lighting, but flickering can occur if the power supply is incompatible or insufficient. Using a properly matched controller and power supply will ensure stable, flicker-free light output.

Yes. Strips connected to the same controller output follow the same settings. If different rooms or areas need independent colors, assign them to separate controller zones. The controller and any amplifiers must be sized for the total load; please share your zone layout so we can suggest a suitable setup.

No. Red, green, blue, mixed colors and the dedicated white channel generally have different light outputs. To compare brightness accurately, check the lumens per meter (lm/m) measured for the specific color or mode; a single lm/m figure may not represent every mode. If your project requires a minimum brightness in a particular color or white mode, tell us which mode matters most.