Product Detail of Artnet To SPI 5440 Pixels 8 Ports H807sa led Controller

1.H801RS /H807SA both supports ART-NET protocol and can directly use ART -NET software such as M5.0 and JINX! . In Art-Net mode, 8 ports output max 5440 pixels for RGB and 4096 pixels for RGBW

2.Eight ports output , controls maximum 8192 pixels, each port controls maximum 1024 pixels. but only using led studio or led build software.

3.SD card supports FAT32, FAT16 format; maximum capacity is 64G bytes, stores up to 64 DAT files.

4.It can Synchronization control by LAN. It can switch files by sending UDP instructions to Network Port 5, or get the serial number of the playing files.

5.H801RS /H807SA can be connected to DMX console, replace file, and adjust speed and brightness and responses quickly

6.Supporting Encryption Function of Restricting Power-on Number and DAT File Encryption

7.Support set DMX address for DMX chips.

Product Display

Note:

1. GND and DAT are for single line chips such as WS2812

2. GND, CLK and DAT are for double line chips such as APA102

3. GND, D- and D+ are for DMX512 chips such as UCS512
 

Working Mode: Online mode Or Offline Mode

1. Online mode Online mode includes Art-Net mode and non Art-Net mode


1). Art-Net mode In Art-Net mode, H801RS supports the following chips:

DMX512, DMX512_H, DMX512-RDM, TM1812, UCS1903, SM16703, TM1913, TM1926, TM1914, TM1814, QED3110, APA102, WS2801, LPD6803

Note: for those chips that have the same time sequence as chips above, H801RS supports them too. For example H801RS supports both WS2812 and WS2811 even though they are not listed

Connection method:

Note:

1. H801RS doesn't need a SD card in Art-Net mode

2. In this mode, NET2 is input, NET1 is output, see image above

Basic working procedure

First, you need to choose the chip model of led lights